1. Be sure the lenses of your goggles, shields or glasses are totally dry before applying FOGTECH®. It is always a good idea to start with a clean faceshield, glasses or goggles. So, use your favorite cleaning method and dry well.

2. If you are using the packet, tear it open and remove the towelette. You don't need to unfold the towlette. If you are using the FOGTECH® bottle, gently squeeze out enough of this solution to completely wet the supplied applicator. Or just wet a small soft absorbent cloth.

3. Quickly wipe the wet cloth on the inside of your lens until it is covered with a thin wet film. Don’t keep rubbing as it dries.

4. Let the FOGTECH® film dry for one minute.

Immediately test your shield or goggles by breathi